For this week’s Guest Post Friday, Musings welcomes ABCO Fire Protection (@abcofire). ABCO Fire Protection is a regional provider of fire protection services in Ohio, Michigan and Pennsylvania. ABCO provides fire safety products that protect life and property.
While most people pay close attention to fire safety in homes and public buildings, Warp Training Australia also recommends that it is important to note fire safety precautions and regulations when building on a job site.
On a job site there are a number of items to pay close attention to. First and foremost, it is important to have a fire protection plan. Floor plans should identify all evacuation routes, on-site fire extinguishers and a name and phone number in case of emergencies. Fire protection plans must be approved by the fire department prior to proceeding past foundation work for new buildings and demolition work.
On a build site it is also vital to make sure emergency vehicles have open and clear access to all roadways. All roads shall have a minimum 13 ½ feet (13 feet and 6 inches) of vertical clearance. In case of an emergency, vehicles must be able to quickly and easily identify the location. Thus all properties must have address numbers or project location visible and legible from street facing property at the fire apparatus access point.
Sites must also have all flammable and combustible liquids in a storage area that is kept free of weeds, extraneous combustible material and kept away from open flames and smoking. Combustible material must be stored a minimum of 20 feet from buildings under construction or undergoing remodel. In addition, all gas containers must be kept a minimum of 10 feet from combustible materials. (Code information noted above is based on the California Fire Code and National Fire Protection Association Standard #1)
And always be sure fire protection systems are installed properly. The first two minutes of a fire are the most crucial so be sure there are plenty of fire extinguishers, hydrants, sprinklers and detectors throughout the property and complete a product inspection once installed.
Last but not least, double check with your local fire inspectors for your cities current codes and standard regulation information.
Please join the conversation with a comment below. I also encourage you to subscribe to keep up with this and other Guest Post Friday posts.
